Home › Buying guides › RFQ checklist
Titanium RFQ Checklist: 10 Details for an Accurate Quote
A titanium quotation is only as accurate as the specification behind it. Two enquiries for the same “Grade 2 plate” can produce very different prices when the standard revision, thickness tolerance, surface condition or certificate scope differs. This checklist lists the ten items worth sending in the first message, so the quote you receive is one you can actually order against.
Why a checklist matters
Mill products are priced against a specification, not a product name. If a detail is missing, a supplier has to assume a default — a common standard revision, a stock size, a standard mill finish, a basic document pack. Those assumptions are reasonable, but they may not match what your drawing or your customer requires. Stating the ten points below removes the guesswork and makes competing offers comparable line by line.
The ten items
- Product form and condition. Plate, sheet, bar, seamless or welded tube, wire, forging, flange, fastener, coil or machined part; plus annealed, cold-worked, hot-rolled or as-machined where it matters.
- Grade and chemistry. Use the grade designation and, for alloys, the chemistry reference: Grade 2 commercially pure, Grade 5 / Ti-6Al-4V, Grade 7 with palladium, Grade 12, Grade 23 ELI. See the grade comparison table for cross-references.
- Standard and revision. ASTM B265 / ASME SB265 for plate, B348 for bar, B338 for tube, B863 for wire, AMS or GB/T and DIN equivalents where applicable. Include the year or revision if your project fixes one. Our standards guide explains how these families relate.
- Dimensions and tolerances. Thickness or diameter, width, length, and the tolerance standard or drawing. State whether cut-to-length, coil or random lengths are acceptable, and flag any tight flatness or straightness requirement.
- Quantity and size list. Total weight or piece count, plus a breakdown by size. Mixed size lists are normal for us; a per-line breakdown lets us check stock across the supply network instead of quoting a single worst-case size.
- Surface finish and edges. Pickled, sandblasted, ground, polished, bright annealed; mill edge or trimmed edge. Surface condition affects both price and suitability for downstream forming or welding.
- Mechanical and test requirements. Minimum tensile or yield values, hardness, flattening or flaring tests for tube, ultrasonic or dye-penetrant examination, grain size, or any customer-specific acceptance criteria.
- Documentation. Mill test report traceable to the heat number is standard; state if you also need a specific certificate wording, third-party inspection, a pre-shipment sample or a material declaration. See quality & documentation.
- Packing and marking. Wooden case, pallet or bundle, protection for surface finish, heat-number marking on each item, and any label text required by your warehouse. Export packing is covered in packaging & shipping.
- Destination and Incoterm. Destination country and port, preferred Incoterm, target dispatch date, and whether air or sea freight is expected. These determine freight, insurance and document scope as much as the material itself.
What happens when a detail is missing
Nothing breaks — we ask. But each round trip adds a day, and a quote built on a default can look cheaper than the specification you actually need. The most common gaps are the standard revision, the tolerance reference and the certificate scope. If you are at an early stage and only know the application, send that instead: a description of the service (temperature, medium, pressure) plus a rough size and quantity is enough for us to propose a grade and a form to quote against.
A usable first message
Send your specification
Product, grade, standard, dimensions, quantity and destination are enough to start. Send a drawing or a marked-part photo if you have one — it usually shortens the technical confirmation.